Art Glitter - Metal Tip Precision Applicator (Suits Deigner Dries Clear Adhesive)
Ultrafine Metal Tip is necessary for precision application and fine line writing with Art Glitter Designer Dries adhesive.Hold adhesive bottle in your hand like a pencil touch spout tip or Ultrafine Metal Tip to surface before squeezing bottle. Once tip is in place carefully squeeze bottle and move spout or tip over area to achieve a controlled accurate line. Our adhesives are three-dimensional apply liberally for best results.Spoon glitter on adhesive while glue is wet white and shiny. Turn project over tray/creased paper and tap backside with spoon to expel excess glitter before moving onto next color. Adhesive will hold glitter you do not have to wait for it to dry before tapping excess off.Always put adhesive down in small controlled areas so glitter can be applied before adhesive begins to dry. Depending on thickness of adhesive and climate your area should dry in 10 to 30 minutes.Ultrafine Metal TipOriginally created to screw onto the adhesive bottle for writing calligraphy with adhesive it did not take long to find out the tip also worked well for detailed artwork.To attach metal tip to spout remove seal under lid in glue bottle and tightly twist black spout back on. Pop off spout cover attach Ultrafine Metal Tip by firmly turning it to the right with a downward motion. If glue squeezes out the bottom of spout or tip tighten with one more twist.The tip makes it possible to put our adhesive down in fine controlled lines or dots. Fill in small areas in a stamp design or other artwork for precision detailing.Wipe tip often with cotton cloth for fine line control. Use stainless steel pin in tip for temporary storage and cleaning. Self clean tip in original tube by soaking in water. Blow out adhesive water twice before reattaching.